Replacement Ear Pad Cushions Compatible with the Sony WH-CH700, ZX770, ZX780
$31.00 $27.90
Save 10% off with code BOXINGDAY24
Fits Wrist
How do I know if a Watch Strap will fit your wrist?
These measurements are the cirucmference size of wrist that this strap will fit when attached to your watch and done up using the provided strap connections. This can be worked our for your wrist by using a sewing tape to measure the cirucmerfence of your wrist just below your wrist bone.
Please note: this measurements are in Milimeteres (mm)
What is the Watch Lug Width?
The Lug Width refers to the width of the watch where the watch strap attaches.
The Watch Strap is often the same as the Lug Width but not always, sometimes the strap of the width can vary to where it attaches to the watch (attaches to the Watch Lug)
In this instance, this watch strap will fit a watch with a lug width of
What is the Watch Strap Width?
The Watch Strap Width (also know as the Watch Buckle Width), which is the width of the strap at the buckle. While this is often the same as the Lug Width, it is not always the same. For this Watch Band, the Watch Strap Width is
What is the Total Watch Strap Length?
The Total Watch Strap Length refers to the total length of the Watch Strap (both pieces pictured above added together, ie Total Watch Strap Length = Short Part + Long Part) when butted together. This excludes the watch itself or where the buckle holes are, rather the total length of the phsyical strap itself.
This does not mean this is the size wrist this will fit.
What is the Watch Length?
The Watch Length (also known as the Case Size or Case Diameter) is the length of the watch itself from watch strap end to watch strap end (also known as Lug to Lug). This can be added to the openable watch size to work out the size strap needed to fit your wrist circumference.
 Material
|
Leather, Mesh |
|---|---|
Width |
Approx. 80mm |
|
Height |
Approx. 100mm |
|
Thickness |
Approx. 20mm |
Comes With |
|
Compatible Watch Brand |
Sony |
Compatible with |
|
Compatible Watch Model Number(s) |
|
Check out these high quality Ear Pads Cushions compatible with Sony Headset Range.
Standout from the crowd!
Material: Foam
Compatible with:
- Sony WH-CH700N
- Sony ZX770BN
- Sony ZX780
How to install?
A: 1. If there is no plastic buckle on the back of your original earmuffs.
Install method:
Snap the back of the earmuffs into the mounting seam on the side of the earphone. Then slowly pull the back into the seam by hand to complete the installation
2.If there is a plastic buckle on the back of your original earmuffs
Install method:
·Remove the old headphone sleeve from the headphone.
·Remove the plastic buckle from the original earmuffs.
·Put the plastic clip on the back of the new earmuffs.
·Align the new earmuffs with the notch of the earphone and press firmly(Or rotate).
These are not manufactured by Sony by are fully compatible with the Sony Range.
Our money back guarantee applies if you are unhappy with this purchase for any reason.
